Home Menu
Home » Products » Display Interface
Back to Display Interface

PI3HDMI101-B

HDMI 2.5Gbps Redriver with I2C Buffer with Auto-Rx Termination Support for Receiver Applications
Keep Me Posted

Please sign in or register to stay updated about this part.

Product Description

Pericom Semiconductor’s PI3HDMI101-B 1:1 active ReDriverTM circuit is targeted for high-resolution video networks that are based on DVI/HDMITM standards and TMDS signal processing. The PI3HDMI101-B is an active ReDriver with Hi-Z outputs. The device receives differential signals from selected video com- ponents and drives the video display unit. This solution also provides a unique advanced pre-emphasis technique to increase rise and fall times which are reduced during transmission across long distances.

Each complete HDMI/DVI channel also has slower speed, side band signals, that are required to be switched. Pericom’s solu- tion provides a complete solution by integrating the side band buffer together with the high speed buffer in a single solution. Using Equalization at the input of each of the high speed chan- nels, Pericom can successfully eliminate deterministic jitter caused by long cables from the source to the sink. The elimina- tion of the deterministic jitter allows the user to use much longer cables (up to 25 meters).

The maximum DVI/HDMI Bandwidth of 2.5 Gbps provides 36- bit DeepColorTM support, which is offered by HDMI revision 1.3. The PI3HDMI101-B also provides enhanced robust ESD/EOS protection of 8kV, which is required by many consumer video networks today.

The Optimized Equalization provides the user a single optimal setting that can provide HDMI compliance for all cable lengths: 1 meter to 20 meters and color depths of 8bit/ch, or 12bit/ch.

Pericom also offers the ability to fine tune the equalization set- tings in situations where cable length is known. For example, if 25 meter cable length is required, Pericom's solution can be adjusted to 16dB EQ to accept 25 meter cable length.

Using Pericom's patent-pending Rx termination detection circuit, PI3HDMI101-B can automatically disable its own input 50-Ohm termination when no 50-Ohm termination is detected in the HDMI Rx chipset. If a switch is used between the PI3HDMI101-B and the HDMI Rx, our part can detect the 50-Ohm termination in the switch to determine if our input should be off or on. 

Features

  • Supply voltage, VDD = 3.3V ±5%
  • Support for both DVI and HDMITM signals
  • Supports both AC-coupled and DC-coupled inputs
  • Supports DeepColorTM
  • High Performance, up to 2.5 Gbps per channel
  • 5V Tolerance on I2C path
  • Integrated 50-ohm (±10%) termination resistors at each high speed signal input
  • Integrated Rx termination detection circuit Configurable output swing control
  • (400mV, 500mV, 600mV, 750mV, 1000mV)
  • Configurable Pre-Emphasis levels (0dB, 1.5dB, 3.5dB, & 6.0dB, 9.0dB)
  • Configurable De-Emphasis (0dB, -3.5dB, -6.0dB, -9.5dB)
  • Optimized Equalization
  • Single default setting will support all cable lengths
  • 8kV Contact ESD protection on all input data/clock channels per IEC61000-4-2
  • Hot insertion support on output high speed pins & SCL/SDA pins only
  • Propagation delay ≤ 1ns
  • High Impedance Outputs when disabled
  • Packaging (Pb-free & Green): 42-contact TQFN (ZH42)

Product Specifications

Product Specs

Channels/Out 4
Channels/In 4
Inputs HDMI
Ports/In 1
Outputs HDMI
Ports/Out 1
Speed (Gbps) 2.5
Power Supply 3.3
Type Redriver

Quality & Reliability

Quality Documentation

Process Qualification

Technical Documents

Application information
Evaluation board

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Orderable Part Number Status Package Temp Range ℃ Pb (Lead) Free Packing Buy from Distributor /
Contact Sales
PQR PDN Request
Qty. Carrier Samples Material Report (SGS)
PI3HDMI101-BZHE Active TQFN-42 0 to 70 Yes 400 TRAY Contact Sales Samples SGS
PI3HDMI101-BZHEX Active TQFN-42 0 to 70 Yes 3500 T/R Contact Sales Samples SGS

PCNs

Product Change Notices

PCN # Issue Date Subject
11-17 2011-19-08 Copper wire qualification for copper bondwire process on TQFN (ZF56, ZF32, ZH42, ZH32, ZD48) package at SPEL assembly site completed.
15-04 2015-04-02 packing method has been changed for these packages from tubes to tray: ZD48, ZF36, ZF56, ZH42.

FAQs

Keep Me Posted

Please sign in or register to stay updated about this part.