Diodes Incorporated
Back to Bus Switches

PI3C32X384 (Obsolete)

2.5V/3.3V, High-Bandwidth Bus Switch, 20-Bit, Hot Insertion

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI3C32X384, is a 2.5V or 3.3Volt, highbandwidth 20-bit, 2-port bus switches designed with a low Onresistance allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. Four bus enable signals are provided, one for each of the upper and lower five bits of the two 10-bit buses.

Features

  • Near-Zero propagation delay
  • 5-ohm switches connect inputs to outputs (PI3C32X384)
  • High Bandwidth Operation (>400 MHz)
  • Permits Hot Insertion
  • 5V I/O Tolerant
  • 2.5V Supply Voltage Operation
  • Packaging (Pb-free & Green):
    • 48-pin 150-mil wide plastic BQSOP (B)

Applications

  • High Bandwidth Data switching
  • Hot Docking

Product Specifications

Product Parameters

Configuration 20-Channel, 1:1
Differential Channels N/A
HotInsertion 1
Lanes N/A
OtherFeatures N/A
RailToRail 0
Signal Type Single Ended
Single Ended Channels 20
Type N/A
Voltage 3.3

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request: 
Application information, Evaluation board, and Other technical documents

Request Documents