Back to Bus Switches

PI3C3245 (Not Recommended for New Design (NRND))

NRND = Not Recommended for New Design

2.5V/3.3V, High-Bandwidth Bus Switch, 8-Bit, Hot Insertion

Datasheet

NOTE: Datasheet may not yet reflect updated package obsolescence/phase out status or Package Drawing. Please refer to the BUY NOW tab for the most up to date package options and drawings. Please refer to PCN/PDN tabs for most current package obsolescence/phase out status.

Contact Sales

Product Description

The PI3C3245 is a 2.5 volt or 3.3 volt 8-bit, 2-port bus switch designed with a low On-Resistance (5-ohm) allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BE) input signal. It is very useful in switching signals that have high bandwidth (>400 MHz).

Features

Near-Zero propagation delay
5-ohm switches connect inputs to outputs
High Bandwidth Operation (>400 MHz)
Permits Hot Insertion
5V I/O Tolerant
Rail-to-Rail 3.3V or 2.5V Switching
2.5V Supply Voltage Operation
Packaging (Pb-free & Green):

20-pin 150 mil wide plastic QSOP (Q)

Product Specifications

Product Parameters

Configuration	8-Channel, 1:1
Differential Channels	N/A
HotInsertion	1
Lanes	N/A
OtherFeatures	N/A
RailToRail	0
Signal Type	Single Ended
Single Ended Channels	8
Type	N/A
Voltage	3.3

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN #	Issue Date	Implementation Date	Subject
PCN-2642	2023-09-05	2024-03-05	Device End of Life (EOL)