Diodes Incorporated
Back to Analog Switches

PI5A3166

Single SPST low Ron (0.8 ohm) Analog Switch, High Enable

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI5A3166 is a high-bandwidth, fast single-pole single-throw (SPST) CMOS switch. It can be used as an analog switch or as a low-delay bus switch. The device features ultra low RON of 0.8Ω typical at 3.0V VCC and will operate over the wide VCC range of 1.65V to 5.5V. The PI5A3166 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature services the mobile handset applications very well by allowing direct interface with baseband processor general purpose I/Os. The control input, S, is independent of supply voltage.

Features

  • CMOS Technology for Bus and Analog Applications
  • Low On-Resistance: 0.8Ω at 3.0V
  • Wide VCC Range: 1.65V to 5.5V
  • Rail-to-Rail Signal Range
  • Control Input Overvoltage Tolerance: 5.5V
  • Fast Transition Speed: 2ns at 5.0V
  • High Bandwidth: 200MHz
  • Extended Industrial Temperature Range: -40°C to 85°C
  • I/O pins Has Power-off Protection Function
  • Packaging (Pb-free & Green):
    • -5-pin SOT23
    • -5-pin SC70

Applications

  • Cell Phones
  • PDAs
  • Portable Instrumentation
  • Battery powered Communications
  • Computer Peripherals

Product Specifications

Product Parameters

Compliance(Only Automotive supports PPAP) Standard
Configuration 1-Channel SPST
Differential Channels N/A
HotInsertion 0
Lanes N/A
OtherFeatures N/A
RailToRail 0
Signal Type Single Ended
Single Ended Channels 1
Type SPST
Voltage 5

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request: 
Application information, Evaluation board, and Other technical documents

Request Documents