Diodes Incorporated
Back to Analog Switches

PI5A100

Single Supply, High Speed, Quad SPDT CMOS Analog Switch with Master Enable

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI5A100 is an improved Quad Single-pole double-throw (4SPDT) CMOS analog switch designed to operate with a single +2V to +6V power supply. The EN pin may be used to place all switches in a high-impedance state. This high precision device is ideal for low-distortion audio, video, and data switching and routing. Each switch conducts current equally well in either direction when on. In the off state each switch blocks voltages up to the power-supply rails. The PI5A100 is fully specified with +5V, and +3.3V supplies. With +5V, it guarantees less than 10Ω On-Resistance. On-Resistance matching between channels is within 2Ω. On-Resistance flatness is less than 4Ω over the specified range. The PI5A100 guarantees fast switching speeds (tON < 12ns). The PI5A100 is available in the narrow-body SOIC and QSOP packages for operation over the industrial (-40°C to +85°C) temperature range.

Features

  • Single Supply Operation (+2V to +6V)
  • Rail-to-Rail Analog Signal Dynamic Range
  • Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and Error Voltages
  • On-Resistance Matching Between Channels, 0.4Ω Typ.
  • On-Resistance Flatness, <2Ω Typ.
  • Low Charge Injection Reduces Glitch Errors, Q = 6pC Typ.
  • Replaces Mechanical Relays
  • High Speed. tON, 8ns Typ.
  • Low Crosstalk: -100dB @ 10 MHz
  • Low Off-Isolation: -57dB @ 10 MHz
  • Wide -3dB Bandwidth: 230 MHz
  • High-Current Channel Capability: >100mA
  • TTL/CMOS Logic Compatible
  • Low Power Consumption (0.5µW typ.)
  • Packaging (Pb-free & Green Available):
    • -16-pin QSOP (Q)
    • -16-pin SOIC (W)

Applications

  • Audio, Video Switching and Routing
  • LAN Switches
  • Telecommunication Systems
  • Battery-Powered Systems

Product Specifications

Product Parameters

Compliance(Only Automotive supports PPAP) Standard
Configuration 4-Channel SPDT
Differential Channels N/A
HotInsertion 1
Lanes N/A
OtherFeatures None
RailToRail 0
Signal Type Single Ended
Single Ended Channels 4
Type None
Voltage 7

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request: 
Application information, Evaluation board, and Other technical documents

Request Documents