Diodes Incorporated
Back to Analog Switches

PI3V713

7-Channel Analog Video Switch

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI3V713 is a 7-channel video mux/demux used to switch between multiple VGA sources or end points. In a notebook application where analog video signals are found in both the notebook and the dock, a switch solution is required to switch between the two video port locations. With the high bandwidth of ~1.7GHz, the signal integrity will remain strong even through the long FR4 trace between the notebook and the docking station. In addition to high signal performance, the video signals are also protected against high ESD with integrated diodes to VDD and GND that will support up to12kV HBM ESD protection.

Features

  • Designed specifically to switch VGA signals
  • 7-Channels for VGA signals (R,G,B, Hsync, Vsync, DDC Data, and DDC CLK)
  • Automatic or manual switching supported
    • –Forces re-read of EDID when automatically switching
  • VDD = 3.3V +/-10%
  • DDC path will operate as a 5V to 3.3V level shifter
  • H/V output buffer with +/-24mA drive
  • ESD tolerance on video I/O pins is up to 12kV HBM per JEDEC standard
  • -3dB BW of 1.7GHz (typ)
  • Low Xtalk, (-38dB typ)
  • Low and Flat ON-STATE resistance (Ron = 4.8-Ohm, Ron(Flat) = 0.5ohm, typ)
  • Low input/output capacitance (Con = 5.6pF, typ)
  • Packaging (Pb-free and Green):
    • –32-contact TQFN (ZLE)

Application

Routing VGA signals with low signal attenuation and high ESD.

Product Specifications

Product Parameters

Compliance(Only Automotive supports PPAP) Standard
Configuration 7-Channel, 2:1
Differential Channels N/A
HotInsertion 0
Lanes N/A
OtherFeatures N/A
RailToRail 0
Signal Type Single Ended
Single Ended Channels 7
Type SPDT
Voltage 3.3

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request: 
Application information, Evaluation board, and Other technical documents

Request Documents

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2585 2022-06-08 2022-09-08 Qualified Additional Assembly/Test (A/T) Sites, Wafer Fab IMD Backend, and Package Outline Dimension Change

FAQs