Diodes Incorporated
Back to Analog Switches

PI3USB14-A

3.3V, 2-Channel, 4:1 Mux USB 2.0 Switch

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI3USB14-A is a 2-channel, 4:1 Multiplexer/Demultiplexer with 3-state outputs. The switch introduces no additional ground bounce noise or propagation delay. The PI3USB14-A device is very useful in switching USB 2.0 signals and others that have high bandwidth (-3dB BW is 815MHz).

Features

  • Near-Zero propagation delay
  • 5Ω switches connect inputs to outputs
  • High signal passing bandwidth (-3dB BW is 815MHz)
  • Beyond Rail-to-Rail switching
  • 5V I/O tolerant with 3.3V supply
  • 3.3V supply voltage operation
  • Hot insertion capable
  • Industrial operating temperature: -40ºC to +85ºC
  • ESD protection
    • 8kV per JESD22 test spec (HBM)
    • +/-4kV per IEC61000-4-2 spec (contact)
  • Latch-up performance >250mA per JESD17
  • Packaging (Pb-free & Green available):
    • 16-pin 150-mil wide plastic TSSOP (L)
    • 20-pin Very Thin Quad Flat, No lead TQFN (ZH)

Product Specifications

Product Parameters

Compliance(Only Automotive supports PPAP) Standard
Configuration Mux: 4-Channel, 4:1
Differential Channels 1
HotInsertion 0
Lanes N/A
OtherFeatures N/A
RailToRail 0
Signal Type Differential and Single Ended
Single Ended Channels 2
Type SP4T
Voltage 3

Technical Documents

Design tool model software

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request: 
Application information, Evaluation board, and Other technical documents

Request Documents