1.2V 5.0Gbps Single-Channel USB 3.2 Gen 1 ReDriver with Equalization & Emphasis
The PI2EQX510T is a low power, high performance 5.0 Gbps signal ReDriver designed specifically for the USB 3.2 Gen 1 protocol. The device provides programmable equalization and De-Emphasis to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference.
PI2EQX510T supports one 100ohm differential CML data signals between USB 3.2 Gen 1 host and end point device, over cable, or to extend the signals across other distant data pathways on the user’s platform. The integrated equalization circuitry provides flexibility with signal integrity of the signal before the ReDriver. A low-level input signal detection and output squelch function is provided. The channels’ input signal level determines whether the output is active.
The PI2EQX510T also includes a receiver detect function. The receiver detection loop will be active again if the corresponding channel’s signal detector is idle for longer than 7.3mS.
The channel will then move to Unplug Mode if load not detected, or it will return to Low Power Mode (Slumber Mode) due to inactivity.
Compliance (Only Automotive supports PPAP) | Standard |
---|---|
Channels | 1 |
Data Rate (Gbps) | 5 |
Lanes/Ports | 0.5 |
Output Swing Max (mV) | 1100 |
Programming Interface(s) | Pinstrap |
Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents