Diodes Incorporated
W QFN3060 40

Image shown is for reference only. Actual package may vary. Refer to the product data sheet for package details.

W-QFN3060-40.png
Back to Display Interface

PI3HDX511F

HDMI1.4 3.4Gbps Wide EQ ReDriver

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Description

PI3HDX511F is a low power HDMI 1.4b ReDriver and Display- Port dual mode level shifter supporting 3.4Gbps data rate with 48-bpp Deep Color support.

For mobile platforms, extending battery hours have been one of the most challenges. PI3HDX511F has rich power saving states management features to extend battery hours less than 1mA stand-by current, passive-type DDC switch, output squelch, HPD (Hot plug Detect) detection and dual power supply (1.5/3.3V) option.

PI3HDX511F also designed to support both source and sink side system application. For dual side application, it supports wide range EQ setting, data/clock pin swapping, double termination/ open-drain output and DDC buffer options.

Main applications are computers, display monitors and related peripheral devices.

Application(s)

  • Notebook/ Desktop computers
  • Monitors, A/V receivers
  • Dongle and Switch boxes
  • Embedded Video/Display systems

Feature(s)

  • Low power multi purpose HDMI 1.4b compliant redriver with DisplayPort dual mode level shifter with many pin-strapping configuration options
  • Operation up to 3.4 Gbps per lane (340MHz pixel clock)
  • 4K Ultra HD, 3D Video formats (1080p, 1080i, 720p), 48-bit per pixel Deep Color support
  • Low standby current <1mA with DDC passive switch mode
  • Flexible 6 steps equalization control steps with 3 steps pre-emphasis: 2.5, 5, 7.5 dB for short range or 5, 10, 15 dB for long range application.
  • Pre-emphasis control 3 steps: 0, 1.5, 2.5 dB
  • Configurable HDMI or DisplayPort dual-mode input with pin stripping option
  • Automatic output squelch and HPD function for power saving states management at no input signal condition
  • Clock & Data pin swap function for sink side application: D2/D1/D0/CLK or CLK/D0/D1/D2
  • Active DDC buffer modes for long range application
  • Single(3.3V) or Dual power supply (3.3/1.5V) operation
  • Integrated ESD protection on I/O pins for 8kV contact per IEC61000-4-2, level 4 and 8kV HBM
  • 40-pin TQFN(ZL40) 3x6mm package

Product Specifications

Product Parameters

Channels/In 4
Channels/Out 4
Inputs DP++,HDMI
Ports/In 1
Outputs HDMI
Ports/Out 1
Speed (Gbps) 3.4
Power Supply 3.3, 3.3/1.5
Type Redriver

Technical Documents

Application Information

Evaluation Boards and User Guides

Design tool model software

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2328 2018-04-12 2018-10-12 Device End of Life for tray packaging only

FAQs