Please sign in or register to stay updated about this part.
PI3HDMI336 is an I2C configurable active switch using Pericom’s new ActiveEyeTM technology to achieve optimized signal integrity for cable or on board transmission.
Through I2C interface, system designer can easily program and adjust equalization, emphasis and output swing settings.
With integrated DDC channel Mux, Hot Plug Detection De-Mux, cable plug-unplug detection and HDMI 1.4 ARC transmitter, PI3HDMI336 saves GPIO control pins, provides optimized trace routing, and reduces BOM cost.
Programmable TMDS input termination settings helps designers to avoid the compatibility issue caused by non standard HDMI source.
Programmable output termination setting supports double termination option between PI3HDMI336 and the HDMI receiver chip. This feature minimizes the reflection caused by improper impedance matching and reduces the signal jitter.
PI3HDMI336 is HDMI 1.4 compatible with backward compatibility to the DVI 1.0 standard and can be used for the DP++ application devices.
HDMI 1.4 compliant with fast video switch among each ports
I2C control 3:1 HDMI active switch Mux with DC coupled or AC coupled Dual mode DisplayPort signals
Output will maintain its DC coupled, current steering
TMDS compliance input can be AC coupled video or DC coupled
2.5Gbps data rate for TMDS clock up to 250MHz
Support up to 36-bits per pixel Deep ColorTM modes
Programmable equalizer, emphasis and amplitude settings to achieve optimized HDMI signal integrity
Integrated selectable DDC active/ passive switch to connect DDC path
Idle clock detection function for output squelch
Programmable TMDS termination control
TMDS input pull-up 50 Ohm termination, pull-down >120K Ohm resistor when switch is deselected
Double terminated TMDS output
Integrated ESD protection on I/O pins to connector