Diodes Incorporated
Back to Crystal Oscillator (XO)

FD 3.3V

3.3V, 5.0x3.2mm, CMOS Crystal Oscillator

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The FD Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 5.0 x 3.2mm surface-mount ceramic package.

Features

  • 1 to 133MHz Frequency Range
  • <1 ps RMS jitter with fundamental or overtone design
  • Low power standby mode
  • Pb-free and RoHS/Green compliant

Applications

The FD Series is ideal for compact, highdensity applications requiring low jitter or tight stability, including:

  • Ethernet
  • EPON
  • Fibre Channel
  • Serial Attached SCSI (SAS)
  • Server & Storage platforms
  • SONET/SDH linecards
  • T1/E1, T3/E3 linecards
  • DSLAM
  • 802.11a/b/g WiFi

Product Specifications

Product Parameters

Subfamily General XO
Product Series FD_3
Compliance(Only Automotive supports PPAP) Standard
Freq Range (MHz) 1 to 162
Jitter RMS (ps) <1
Stability (PPM) 20 to 50
Package Size (mm) 5.0 x 3.2
PkgType Ceramic Seam
Output Logic CMOS
Supply Voltage (V) 3.3
Pads 4
Legacy PN S1633

Related Content

Quality Documentation

Technical Documents

Recommended Soldering Techniques

TN1.pdf

Additional Technical Documents are available upon request:
Application information, Evaluation board, and Other technical documents

Request Documents

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2667 2024-02-07 2024-05-07 Qualified Additional Bill of Material (BOM) - Die Source, Die Revision.

FAQs