Diodes Incorporated
Back to Inactve Datasheet Archive

PI3C32X245 (Obsolete)

2.5V/3.3V, High-Bandwidth Bus Switch, 16-Bit, Hot Insertion

Contact Sales

Log in or register to manage email notifications about changes to datasheets or PCNs for this part.

Product Description

The PI3C32X245 is a 2.5V or 3.3V 16-bit, 2-port bus switch designed with a low On-Resistance (5-ohm) allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. The switches are turned ON by the Bus Enable (BEN) input signal. It is very useful in switching signals that have high bandwidth (>400 MHz).

Features

  • Near-Zero propagation delay
  • 5-ohm switches connect inputs to outputs
  • Permits Hot Insertion
  • Capable of Hot-Swapping
  • 5V I/O Tolerant
  • 2.5V Supply Voltage Operation
  • Rail-to-Rail 3.3V or 2.5V Switching
  • High Bandwidth Operation (>400 MHz)
  • Packaging (Pb-free & Green):
    • 40-pin, 150-mil-wide plastic BQSOP (B)

Product Specifications

Product Parameters

Configuration 16-Channel, 1:1
Differential Channels N/A
HotInsertion 1
Lanes N/A
OtherFeatures N/A
RailToRail 0
Signal Type Single Ended
Single Ended Channels 16
Type N/A
Voltage 3.3

Technical Documents

Design tool model software

Recommended Soldering Techniques

TN1.pdf

Product Change Notices (PCNs)

A PCN may only apply to specific orderable part numbers in this datasheet. Please refer to the corresponding PCN to see the exact orderable part number(s) affected.

PCN # Issue Date Implementation Date Subject
PCN-2481 2020-08-26 2021-02-26 Device End of Life (EOL)