Server Solutions

 

Timing Solutions™[ back to top ]

Pericom and SaRonix-eCera joined forces to offer a total timing solution for servers that includes Crystals, Clock Generators & Buffers for the motherboard along with Oscillators for peripheral communications:

SaRonix-eCera Quartz Crystals
SaRonix-eCera 49SMLB Series Crystal

PI6C410B Clock Generator (CK410B)
Supports Intel Pentium & next Gen PCIe chipset
Dual Channel DDR/DDR2 Memory

SaRonix-eCera Oscillators
Low-jitter, tight-stability oscillator modules
Available with CMOS/TTL, LVPECL, or LVDS output logic

PI6C20400, 800, 1200 PCIe Clock Buffers [ back to top ]
Also known as the DB400, DB800, & DB1200 from Intel
Available with 4,8, or 12 Outputs
With or without PLL’s
Needed for next generation designs

Zero Delay Buffer
Low-jitter
Available in 1.8V - 3.3V
Low phase offset
Multiply/divide option

Clock Converter/Distributor [ back to top ]

Clock Converter P/N	Input	Output	# Outs	Freq.	Voltage
PI6C485311	DIFF^	LVPECL	2	650MHz	3.3
PI6C48533-01	DIFF^	LVPECL	4	650MHz	3.3
PI6C48543	DIFF^	LVDS	4	800MHz	3.3
PI6C4853111*	DIFF^	LVPECL	10	500MHz	2.5/3.3
PI6C485352**	DIFF^	LVPECL	12	500MHz	2.5/3.3
PI6C487016/20	DIFF^	LVCMOS	16/20	250MHz	1.5~3.3
PI90LVP10	LVCMOS	LVPECL	1	400MHz	3.3
PI6C41204	LVCMOS	LVPECL	4	266MHz	3.3
PI6C48535-01	LVCMOS	LVPECL	4	266MHz	3.3
PI6C48545	LVCMOS	LVDS	4	650MHz	3.3
PI6C48535-11	XTAL	LVPECL	4	300MHz	3.3
PI6C48545-11	XTAL	LVDS	4	650MHz	3.3

DIFF^ = Differential Signals include LVPECL, LVDS, LVHSTL, SSTL
* - 2:1 Mux at input | ** - 2:1 Mux at output

Pericom offers an array of products for servers and blade servers that offer increased capabilities and reduced cost.

PCI Express (PCIe) Signal Switch
Supports the PCI Express Specifications and Bandwidth
Splits the x16 graphics link into two x8 PCI Express links, if supported by the chipset
Splits the x8 PCI Express link into two x4 PCI Express links, if supported by the chipset
Used for redundancy on the blade server

PCI Express (PCIe) GreenPacket™ Packet Switch
Designed Green – low power, Pb-free, port shut-off
Low Power – <400mW typical
Low Latency – <120nS typical
Compliant to PCISIG PCIe rev 1.1
I2C bus support
PCIe Hot Plug compliant
2 VC’s and 8 TC’s per Port, Isochronous Support on VC1

LAN Switch [ back to top ]
Supports legacy fast-ethernet back-plane blades
Supports newer Gigabit Ethernet blades
Supports redundancy

 

PCI Bridge Solutions [ back to top ]

Pericom's PCI Express products provide solutions for Signal Quality, System Performance, Flexibility, Reliabliity, System Timing, EMI, Express Cable, and much more. Our PCI bridges have enhanced features that beat the competition, and are able to support 8 outstanding transactions in each direction. See all PCI Bridge Products.

PCI Express to PCI Reversible Bridge PI7C9X110 Reversible - PCIe configurable as Primary or Secondary PCI port = 32-bit/66MHz PCI Express Port x1Lane GPIO Support - 4 GPIO pins Isochronous support PCISIG 1.1 Compliant Industrial temp standard
PCI Express to PCI-X Bridge [ back to top ] PI7C9X130 Reversible - PCIe configurable as Primary or Secondary PCI-X port = 32-bit/66MHz Supports PCI mode Configurable Transparent/non-transparent PCI Express Port x4 Lane and PCI Express Hot Plug GPIO Support - 4 GPIO pins Isochronous support Only PCIe to PCI-X Bridge that is PCISIG 1.1 Compliant Industrial temp standard

• PI7C21P100B PCI-X to PCI-X Bridge
  High-performance, low-power 64-bit/133MHz 2-port PCI-X Bridge
  3.3V signaling w/5V I/O tolerance
  Dynamic prefetching control in PCI mode
  Configurable free space in the memory data FIFO
  For Legacy PCI-X systems

PCI®, PCI-X®, PCIe®, PCI Express® and PCI-SIG® are registered trademarks of the PCI-SIG® (www.pcisig.org).

ReDriver™, GreenPacket™, and SaRonix-eCera™ are trademarks of Pericom Semiconductor.